Contents

Keepalived provides a strong and robust health checking for LVS clusters. It implements a framework of health checking on multiple layers for server failover,and VRRPv2 stack to handle director failover. How do I install and configure Keepalived for reverse proxy server such as nginx or lighttpd? If your are using a LVS director to loadbalance a server pool in a production environment,you may want to have a robust solution for healthcheck & failover. This will also work with reverse proxy server such as nginx.

Internet--
         |
    =============
    | ISP Router|
    =============
         |
         |
         |      |eth0 -> 192.168.1.11 (connected to lan)
         |-lb0==|
         |      |eth1 -> 202.54.1.1 (vip master)
         |
         |      |eth0 -> 192.168.1.10 (connected to lan)
         |-lb1==|
                |eth1 -> 202.54.1.1 (vip backup)

Where:

• lb0 - Linux box directly connected to the Internet via eth1. This is master load balancer.
• lb1 - Linux box directly connected to the Internet via eth1. This is backup load balancer. This will become active if master networking failed.
• 202.54.1.1 - This ip moves between lb0 and lb1 server. It is called virtual IP address and it is managed by keepalived.
• eth0 is connected to LAN and all other backend software such as Apache,MySQL and so on.

You need to install the following software on both lb0 and lb1:

• keepalived for IP failover.
• iptables to filter traffic
• nginx or lighttpd revers proxy server.

DNS settings should be as follows: loadbalancer.com - Our sample domain name. lb0.loadbalancer.com - 202.54.1.11 (real ip assigned to eth1) lb1.loadbalancer.com - 202.54.1.12 (real ip assigned to eth1) www.loadbalancer.com - 202.54.1.1 (VIP for web server) do not assign this IP to any interface.

Visit keepalived.org to grab latest source code. You can use the wget command to download the same (you need to install keepalived on both lb0 and lb1):

# cd /opt
# wget 
# tar -zxvf keepalived-1.1.19.tar.gz
# cd keepalived-1.1.19

You need to install the following packages:

1. Kernel-headers - includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the glibc package.
2. kernel-devel - this package provides kernel headers and makefiles sufficient to build modules against the kernel package.

Make sure kernel-headers and kernel-devel packages are installed. If not type the following install the same:

# yum -y install kernel-headers kernel-devel

Type the following command:

# ./configure --with-kernel-dir=/lib/modules/$(uname -r)/build此时，

解决方法：安装好popt的开发包。

重新./configure 即可。

Sample outputs:
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
...
.....
..
config.status: creating keepalived/check/Makefile
config.status: creating keepalived/libipvs-2.6/Makefile
Keepalived configuration
Keepalived version      ?: 1.1.19

Compiler                ?: gcc

Compiler flags          ?: -g -O2

Extra Lib               ?: -lpopt -lssl -lcrypto

Use IPVS Framework      ?: Yes

IPVS sync daemon support?: Yes

Use VRRP Framework      ?: Yes

Use Debug flags         ?: No

Compile and install the same:

# make && make install

Type the following commands to create service and run it at RHEL / CentOS run level #3?:

# cd /etc/sysconfig
# ln -s /usr/local/etc/sysconfig/keepalived .
# cd /etc/rc3.d/
# ln -s /usr/local/etc/rc.d/init.d/keepalived S100keepalived
# cd /etc/init.d/
# ln -s /usr/local/etc/rc.d/init.d/keepalived .

（编辑：云计算网_泰州站长网）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!